| Glass pipes are of different bouncing colors and | | | | while the tubing cools. |
| shapes. It requires a specific kind of glass pipe to | | | | 4. Move the torch to a cutting flame. Hold the tubing |
| smoke tobacco. It will require a high investment in | | | | closer to the center and bring the middle of the thin |
| materials, but the amusement of designing a glass pipe | | | | strand into the flame. Bend the glass to break it at the |
| is undoubtedly best. These glass pipes are often used | | | | center when it becomes red hot. Allow both ends to |
| as collectables and antiques as they represent | | | | cool. |
| hookah's of the olden times. Glass pipes are often | | | | 5. Take one half of the glass tubing and hold it at both |
| preferred by number of people as it does not affect | | | | ends. Bring the glass towards the cutting flame where |
| the taste of tobacco to a high degree. | | | | the thin end strand meets the thicker tubing. Heat the |
| For glassblowing enthusiasts with an average | | | | glass and break it when it becomes red. Allow both |
| compassionate of their craft, a a glass smoking pipe is | | | | ends to cool. |
| a good activity to undertake. Glass pipes can be | | | | 6. Increase the stationary torch to its original flame |
| fabricated for you or and your smoking partners, or | | | | power. Hold the complete tubing half at the thin end. |
| you may even adjudge to advertise them | | | | Grab the thin strand you cut off in the previous step. |
| commercially. | | | | Bring the end of the thin strand to the flame and heat |
| Steps to be followed to make glass pipe: | | | | until it becomes red. Place the thin strand in the middle |
| 1. Wear insulating clothing, such as jeans, work gloves | | | | of the thick end of the other tubing half. Hold the thin |
| and safe eye gear, before operating your torch. Tie | | | | strand in place as it cools. |
| back your hair to keep it away from the torch. | | | | 7. Hold the thin ends of the glass tubing, and bring it |
| 2. Turn on your anchored torch. Hold your glass pipe | | | | toward the flame. Work the thick tubing into a desired |
| tubing with both hands at all ends. Accompany the | | | | pipe shape by heating and pulling the glass. Glass |
| tubing appear the flame, so the average comes into | | | | smoking pipes are generally 4 to 8 inches long and |
| acquaintance with heat. Rotate the bottle for 10 | | | | around 1 inch in diameter. Remove the pipe from heat |
| seconds, alone acceptance the tubing to blow the | | | | when you have finished, and allow it to cool. |
| flame, and again accompany the tubing absolutely into | | | | 8. Reduce the torch to a cutting flame. Bring the pipe |
| the flame. Continue alternating the bottle tubing bound | | | | to the flame where one thin strand meets the end that |
| and evenly. | | | | will become the bowl pack. Remove the thin strand |
| 3. When the glass becomes red and pliable, begin to | | | | from the pipe when it becomes red. Allow the pipe to |
| slowly pull it apart. Make sure that a glass strand | | | | cool. |
| remains between the two halves. When the middle | | | | Remember, smoking is injurious to health. However, if |
| strand becomes thin, pull the glass away from the | | | | you must indulge in it, then smoke a glass pipe and do |
| flame and allow it to cool. Continue to rotate the glass | | | | it in style! |