a27clogo.jpg (12459 bytes)

Nexus Multi Configuration

Item Recommended Setting
C11 - Unit for speed KTS
C12 - Speed calibration 1.25
C13 - Speed transducer selection OFF
C21 - Unit for depth Ft
C22 - Calibration of depth 0.0
C23 - Unit for tempature F
C24 - Calibration of tempature 0.0
C31 - Off course alarm 00
C32 - Magnetic variation _15.6 (Check local charts)
C33 - Auto compass deviation Auto DEV
C34 - Auto compass deviation Auto CHK
C35 - Auto compass deviation Auto CLR
C36 - Compass transducer misalignment 000 ADJ
C37 - Heading transducer selection OFF
C38 - Format of position in lat. and lon. OFF
C39 - Calibration of lat. 0.00 LAT
C40 - Calibration of lon. 0.00 LON
C41 - Arrival circle 0.10 ARC
C42 - Nexus autopilot RDR
C43 - Nexus autopilot AP1
C44 - Nexus autopilot AP2
C45 - Nexus analog steer pilot dampening SEA
C46 - Nexus GPS datum 000 LGD
C47 - Headings displayed are magnetic ON
C51 - Display true wind angle OFF
C52 - Unit for wind speed KTS
C53 - Factory setting 1.50 CAL
C54 - Mast top alignment 000 ADJ
C55 - Wind calibration value See wind calibration certificate
C55 - Wind calibration value See wind calibration certificate
C56 - Wind calibration value See wind calibration certificate
C57 - Wind calibration value See wind calibration certificate
C58 - Wind calibration value See wind calibration certificate
C59 - Wind calibration value See wind calibration certificate
C60 - Wind calibration value See wind calibration certificate
C61 - Wind calibration value See wind calibration certificate
C62 - Wind calibration value See wind calibration certificate
C63 - Display true wind angle WIA
C71 - Sound when buttons pressed ON
C72 - Damping of SOG / COG d0
C73 - Receive waypoint from GPS ON
C74 - Transmit waypoints to GPS OFF
C75 - Server navigates from GPS ON
C76 - Compass transducer selection OFF
C77 - Wind transducer selection OFF
C78 - Waypoint block # 00 WBN

 

Nexus WindData Configuration

Item Recommended Setting
C11 - Select dampening d2
C12 - Select main information AWA
C13 - Displaying boat speed, trip log, tempature OFF
C14 - Display NAV functions ON
C15 - Beep when key pressed ON
C21 - Unit for speed KTS
C23 - Unit for tempature F
C24 - Tempature offset 0
C31 - True or magnetic course ON
C32 - Magnetic deviation _15.6 (Check local charts)
C33 - Reference for compass Hdc
C51 - Display true wind OFF
C52 - Unit for wind speed KTS
C53 - Factory calibration 1.50
C54 - Adjustment of wind angle 000
C55 - Wind calibration value See wind calibration certificate
C55 - Wind calibration value See wind calibration certificate
C56 - Wind calibration value See wind calibration certificate
C57 - Wind calibration value See wind calibration certificate
C58 - Wind calibration value See wind calibration certificate
C59 - Wind calibration value See wind calibration certificate
C60 - Wind calibration value See wind calibration certificate
C61 - Wind calibration value See wind calibration certificate
C62 - Wind calibration value See wind calibration certificate
C63 - Speed reference, water or GPS BSP
C64 - Wind trim reference 000
C68 - Roll adjustment 0.0
C69 - Pitch adjustment 0.0
C71 - Wind master OFF
C72 - Log master OFF

Send a Nexus question by clicking here